How to clear disk cache in Linux 

sync ; sudo sh -c 'echo 3 > /proc/sys/vm/drop_caches'



edit: better safe than sorry: flush caches before, as suggested...
edit: sudo sh -c is simplier

Comments

Pascal d'Hermilly said…
Why would you want to clear the disk cache?

I thought that disk cache is a way of getting to your recently used files faster.
Please reply to pascal (at) tipisoft.dk
5/07/2008 11:08 PM
Gautier Portet said…
You want to clear cache for testing/profiling reasons, so you can run multiple tests while always starting with an empty cache. You should never do that in normal use, since the cache will have to be re-filled.
5/16/2008 3:40 PM
cAde said…
I hope you know about sync command, it is a good practice to use sync before you clear disk cache
2/16/2009 5:08 AM
Philippe said…
Thanks, I needed this to benchmark/profile some applications that need access to the same files over and over.
5/13/2009 6:59 PM
Unknown said…
Thanks for the hint!

Using "sudo sh -c 'echo 3 > /proc/sys/vm/drop_caches'" probably makes more sense than involving tee.

Also, your post is formatted such that I couldn't read the line (fixed width, font goes off edge) and had to dig it out of the HTML source. :-)

But again, thanks.
6/11/2009 6:05 AM
Oscar Garcia said…
What about sudo blockdev --flushbufs /dev/sdXY? This way you can flush only desired file system cache.
2/25/2014 9:57 PM
Post a Comment

Popular posts from this blog

Python bdist_rpm & changing the package name

When you create a RPM package with python's distutils, there is something rater annoying: you can't change the package name. or at least not easily. After a moment of bad/hard solutions, I've found a easy and clean way to do it: Let's say you have a customized nose. When you create the RPM with "python setup.py bdist_rpm", the resulting package is nose-$version.rpm, but you want it to be python-nose-$version.rpm, so it can be recognized by redhat packages. But a src.rpm is also created! You just have to install (rpm -i) the src.rpm, this will create a .spec file in ~/rpmbuild/SPECS and a tar.gz in ~/rpmbuild/SOURCES. Now, edit the package name in the spec file, decompress/rename the folder/recompress the tar.gz. Run rpmbuild -ba ~/rpmbuild/SPECS/yourspecfile.spec and the new/renamed RPM is in ~/rpmbuild/RPMS.
Read more

Choosing a CRT-Shader for Youtube

Image
This is part two of the capture of  Stars for Youtube. Video Generation The process is rather simple: Run demo on Dosbox, capture the video. You get a 70fps 320x200 video using the lossless zmbv codec for images, and lossless PCM audio. As the demo is a plain VGA program, this is a perfect copy of what is displayed/played by the demo. Play the 320x200 video with Retroarch, with CRT-shader and video capture. In Retroarch settings, I choose the target resolution, activate video lossless record + GPU shader record. As Retroarch won't play zmbv video, I first transcode to "lossless" h264, also setting the aspect ratio for the next pass. After Retroarch, I transcode the video to h264 Q1 to reduce the video size from 30GB to 10 GB, with no visible quality loss. Here is the makefile I used for the conversion: https://gist.github.com/kassoulet/485ce8bb3c29461ae67a5aeb5a683fbe (remember, the audio is taken from a video I generated using the remastering done in part one)...
Read more

Stars Audio Remastering

Image
I present to you an experiment I did to create the best possible video for an 1995 MSDOS demo. Note the choices I made: Use Dosbox Process the audio from the original modules. Apply CRT emulation to the video. This post will detail the audio processing. Audio Source Choice The original demo uses two Amiga modules (MOD) for the sound, so there is no real panning. Some channels go to the left output, the others to the right. The demo is played in stereo on GUS soundcards, and in mono on SoundBlaster soundcards. For me the panning is questionnable, and after a few tests in mono, I go for a reduced stereo field + mono low-end. For the source I will use a high-quality replayer  with 8-tap fir interpolation to re-generate from the source modules. I also go for a full remastering of the track, as we are taking about one of the finest  masterpiece of French heritage here. (yeah I know the musician is not french :) ) Audio Edit The first step is to merge the two tracks into one, and ch...
Read more